BP630/7 Peened Single Bonded Torsion Bush

£7.68

This type of bush has both chemical bond (inner tube only) and interference fit with the outer tube.  The interference fit provides for pre-stressing of the rubber making it stiffer for normal radial, conical and torsional loads.  It is not intended for use in high axial loading situations.                                        

One advantage of this bush type is that occasional extreme torsional overloads can be accommodated since the bush will slip within the outer tube under these conditions.

  • Bore Diameter (A):  11.2   -0.04/+0.09
  • Bore Length (B):  50.5  +/-0.10
  • Outer Diameter (C):  25.5  +0.00/- 0.15
  • Outer Length (D): 44.5  +/-0.5

All dimensions are in mm.

This torsion bush is commonly found on the following TVRs, and Austin Cars from the 1940s, 1950s and 1960s:

  • TVR: most models, original part number: C0200
  • Austin A40, original part number: 1H5286 and 2H4605
  • Austin A50, original part number: 2H4605
  • Austin A55, original part number: 1H5286 and 2H4605
  • Austin A60, original part number: 1H5286 and 2H4605
  • Austin A70, original part number: 1H5286 and 2H4605
  • Austin A90 Atlantic, original part number: 1H5286 and 2H4605
  • Austin Healey 100 'six', original part number: 2H4605
  • Austin Sprite, original part number: 2H4605
  • Austin 3000 series, original part number: 2H4605
  • Austin BJ 7 & BJ 8, original part number: 1H5286
  • Austin 10 HP Saloon, original part number: 1H5286

Please note: The image is a generic bush of the same family (single bonded & peened)